-
-
Sabarkantha, Gujarat-383215
Flush Door
Our Brochures
Silicon Flush Door (IS:2202)
SILICON flush doors are modern, elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. Obviously, the doors are made with chemically treated seasoned hardwood battens and frames. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS:2202. Flush Doors are treated for total termite and borer protection. The doors can be manufactured according to customized sizes too.
Silicon Flush Door Types
- SILICON GOLD Flush Door (15:2202) :
- SILICON ULTIMA Flush Door (15:2202) :
- Customize Size Available THICKNESS : 30mm, 32mm, 35mm, 38mm, 40mm, 45mm
Ultimate quality and high strength WATER proof (BWP grade) flush door made with PINE wood battens and GURJAN wood core.
BOILING water proof (BWP) grade flush door made with PINE wood battens and POPLAR wood core.
| TECHNICAL SPECIFICATIONS IS:2202 (PART-1) : 1999 | |||
|---|---|---|---|
| # | Test | ISI Requirement | Observed Value |
| 1 | Dimension | Length, Width +/- 5 mm Thickness +/- 1 mm. | Within limits |
| 2 | Squareness | Deviation not more than 1mm on a length of 500 mm | As per ISI Requirement |
| 3 | General Flatness | Twist, cupping, warping not to exceed 6 mm | Within limits |
| 4 | Local Planeness | Depth of deviation at any point to be - <0.5mm< /td> | Within limits |
| 5 | Impact Indentation Test | Depth of indentation not to exceed 0.2 mm | Within limits |
| 6 | Edge Loading Test | Deflection of edge with max, To be - <5 mm | Within limits |
| 7 | Shock Resistance Test | No Visible defect after test | No Visible Defects |
| 8 | Buckling Test | Initial deflection - <50mm residual deflection - <5mm | Within limits |
| 9 | Edge Loading Test | Deflection of edge with max, To be less than 5 mm | No visible damage |
| 10 | Misuse Test | No deformation after Test | No deformation |
| 11 | Varying Humidity Test | No visible warping, twisting, or de-lamination | No such defects observed No de-lemination |
| 12 | End Immersion Test | No de-lamination at the end | No de-lamination |
| 13 | Knife Test | Minimum pass standard | Excellent |
| 14 | Glue Adhesion Test | No de-lamination | No de-lamination |
| 15 | Screw Withdraw Test | Load to withdraw screw to be more than 1000N | As per ISI Requirement |
